80W Joyetech eGrip II VT Starter Kit 2100mAh Battery Capacity

Buy Beauty Products

Buy Beauty Products

100% Original 80W Joyetech eGrip II VT Starter Kit with 2100mAh Battery Capacity and 3.5ml & 2.0ml eGrip 2 Kit Inheriting the all-in-one style, 80W Joyetech eGrip II VT Kit has bigger output in 80W. It applies the new V4.03 firmware with RTC(Real Time Clock) display. The TFTA-Tank technology maximizes...
$419.00 $241.00
Color
White
Black
Red
Silver
Gold
Battery Capacity
-
+
$241.00
100% Original 80W Joyetech eGrip II VT Starter Kit with 2100mAh Battery Capacity and 3.5ml & 2.0ml eGrip 2 Kit Inheriting the all-in-one style, 80W Joyetech eGrip II VT Kit has bigger output in 80W. It applies the new V4.03 firmware with RTC(Real Time Clock) display. The TFTA-Tank technology maximizes anti-leaking function. NotchCoil brings you better vaping experience. eGrip 2 comes with 2 versions in different e-juice capacity: Large(3.5ml)or Small (2.0ml). Large 0.96 inch OLED screen, clock screen protection, multiple tank light colors and upgradeable firmware all make eGrip 2 more practical and attractive. eGrip 2 is a great vaping device you should never miss!Features:Variable temperature controlReal time clock display & screen protectionGame mode and custom logoAll-in-one device with TFTA-Tank TechnologyNotch coil head brings wonderful experienceAdvanced dual battery protectionEliquid illumination LED with 7 changeable colorsFirmware UpgradeableSpecification:Size: 24*45*95mmOutput Mode: RTC/VW/VT(Ti, Ni, SS316)/Bypass/TCR(M1, M2, M3)Output Wattage: 1-80WResistance range: 0.05 - 1.5ohm for VT mode; 0.1 - 3.5ohm for VW/Bypass modeTemperature range: 200~600F or 100~315CBattery Capacity: 2100mAhType 1: Small E-juice Capacity: 2.0mlType2: Small E-juice Capacity: 3.5mlColors: black, gold, red, silver, whitePackage Content1 x eGrip II body1 x NotchCoil 0.25ohm DL.1 x BF SS316 0.5ohm coil head DL.1 x BF Clapton 1.5ohm coil head MTL.1 x mouthpiece1 x atomizer Adapter1 x USB Cable1 x Manual & Warranty CardSimple packing. Customary Packing from the factory, the packing is subject to change without notice.Opertion Guide:Vaping: Hold the fire button and inhale through the mouthpiece. Release the Fire button and exhale.Power on/off: Press the fire button 5 times in quick succession to turn the device on. In the same way, the device will be powered off after 5 presses.Shift between VT/VW/Bypass/TCR Modes: Press the fire button for three times to shift between diffferent Modes when the battery is on. (1)under VW mode, it presents: battery life, ohm, voltage and wattage. (2)under VT mode, it presents: battery life, ohm, wattage, temperature and mode (Ni/Ti).Adjust the wattage/temperature: Under VW mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the wattage (5W-30W); under VT mode, rotate the ring around the button clockwise or counterclockwise to increase or decrease the temperature (100-315C/200-600F). Rotate the ring faster clockwise or counterclockwise for continuous three grades, the device automatically increase or decrease 0.1W/5C(10F) numerically.Atomizer head replacement/refilling: TFTA-Tank technology means Top Filling and Top Airflow. Coil replacement and juice fill can be achieved by removing the top section from the cup.Apply the Atomizer Adapter Unscrew the mouthpiece base, and screw the atomizer adapter tightly with a tool (coin), then you can apply other types of atomizer with eGrip II.Indications: 1.Screen: The OLED screen presents time, watts, ohms, temperature, battery life and timing while vaping. 2.No Atomizer Alert: When the coil is not installed properly, the screen will appear “No Atomizer”. 3.New Coil Alarm: When installing a new coil whose resistance is larger than the previous one to some degree, resetting the “basic resistance” (resistance at room temperature) shall be required. After fitting a new coil, press the fire button while the atomizer base is removed to initiate a reset. After you reinstall the atomizer base with a new head, the screen will appear “new coil up, same down”. Rotate the regulation ring clockwise to confirm that a new coil has been fitted. Should you see this message for any other reason, especially when reinstalling the same coil that is still warm after use. If so, rotate the regulation ring counterclockwise so that the ‘basic resistance” won’t be reset. 4.Device Too Hot Alert: When the device’s inner temperature passes over 70C, the output will shut off automatically and the screen will appear “Device Too Hot” for 5 seconds. After then, it switches back to normal. 5.Temperature Protection: Under VT mode, if the coil’s actual temperature reaches to the set temperature, the device will show “Temp Protection”. 6.Over 10s Protection: If you keep pressing the fire button for more than 10 seconds, the screen will appear “Over 10S”. 7.Atomizer Short-circuit Protection: When atomizer short-circuit occurs, the screen will appear “Atomizer Short”. 8.Atomizer Low Alert: When the atomizer resistance is lower than 0.1ohm under VW mode or lower than 0.05ohm under VT mode, “Atomizer Low” will appear on the screen. 9.Low-voltage Protection: When the battery voltage is lower than 3.3V, the screen will appear “Battery Low” and “Lock”. Thus the battery is locked. Recharging to unlock the battery.Note: 1. Under VT mode, please install the temperature control coils at room temperature ; 2. Only use temperature control coils under VT mode. Damages will be caused when temperature control coils are accidentally used under VW mode. 3. VT mode only supports a maximum of 1.5ohm. It will automatically switch to VW mode when the coil is larger than 1.5ohm or using a normal coil under VT mode.Order Tips eGrip 2 Kit doesn't come with e-liquids. You shall purchase e-liquids separately.There is CE mark on battery end.Compatible with NotchCoil, BF coil, BF RBA.   

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, contact us via email at support@buybeautyproducts.com or simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Recently Viewed Products

Sale

Unavailable

Sold Out